CORROSION INHIBITORS (CI - 121) |
| PRODUCT
USE |
CI-121 is a water-soluble organic corrosion inhibitor. CI-121 is biodegradable. CI-121 is designed to control internal corrosion caused by dissolved
oxygen in Oil & Gas production systems, Gas pipe lines, Water storage / Injection systems and pipelines. |
| DESCRIPTION
|
CI-121
is a specially designed corrosion inhibitor. CI-121 effectively controls
corrosion by dissolved oxygen. It shows excellent results when injected
continuously or batch treatment. It can be used to treat water cut well
flow lines, process equipment and water storage. CI-121 is particularly
suitable for pipelines application where it will partition predominantly
into the water phase ensuring effective treatment of water setting out
at low spots. |
| APPLICATION
|
CI-121 should be applied by continuous injection. For gas and water injection systems, typically dosage level will be 5-20 PPM. |
| HANDLING
|
CI-121 can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be washed with copious amount of water. On Ingestion/Eye contact with the product, medical attention should be sought immediately. |
| PHYSICAL
DATA |
| Appearance: |
Clear Liquid |
| Specific Gravity: |
1.00 ± 0.2 |
| Viscosity: |
< 60 CPS |
| pH Range: |
6.5 - 9.0 |
| Pour Point: |
< - 7 °C |
| Flash Point: |
> 100 °C |
| Boiling Point: |
> 100 °C |
| Solubility: |
Soluble in Water in all proportions |
|
| AVAILABILITY |
200
Kg Net in New HDPE Barrels |
OIL CORROSION INHIBITOR (IOCI - 3970) |
| PRODUCT
USE |
IOCI-3970 is organic corrosion inhibitor intended for use in product pipeline, oil pipeline and production equipment. It is filming amine type corrosion inhibitor. It is developed to work effectively in overhead crude oil distillation units where the corrosion is in form of HCl, H2S and SOx. IOCI-3970 is also effective in cat cracker gas recovery systems where corrosion occurs due to the presence of H2S, cyanide and high pH. |
| DESCRIPTION
|
IOCI-3970 is a film forming corrosion inhibitor for overhead system. |
| APPLICATION
|
- FCC units overheads.
- Crude unit overheads.
- HDS units stripper overheads
|
| Dosage
|
The dosage rate of IOCI-3970 is 5-10 ppm in normal condition on continuous dosage basis. The dosage rate may differ looking at severity of problem. Dosage of IOCI-3970 can be neat continuously or may be diluted with dry solvents. When injected neat at temperature above 2000 F the feeding line to process line must be of stainless steel.
|
| PHYSICAL
DATA |
| Physical Appearance: |
Clear Liquid |
| Density: |
0.92 - 0.94 |
| Flash Point : |
>64 °C Min. |
| Packing : |
MS barrel |
|
GAS CORROSION INHIBITOR (IGCI-3520)
|
| PRODUCT
USE |
IGCI-3520 is a specially designed corrosion inhibitor for gas pipe lines. |
| DESCRIPTION
|
IGCI-3520 is a mixture of filming amines and volatile neutralizers in hydrocarbon solvent. It is efficient for prevention of H2S and CO2 corrosion. The product is freeze stable, non corrosive and can be stored in steel drums. |
| APPLICATION
|
IGCI-3520 should be added in concentration of 5-50 ppm when used continuously. It is also suitable for squeeze treatment, when applied to gas pipe lines. |
| Product Details: |
| Minimum Order Quantity | 200 Litre | | Density | 0.85 - 0.95 | | Flash point | More than 50 Deg C | | Viscosity | less than 20 cst | | Pour Point | less than 6 Deg C | | Pack Size | 200 Kg | | Form | Liquid | | Flash Point (Deg. Celsius) | 52 Deg C | | Usage/Application | Industrial Use | | Application | Industrial Use |
|
| PHYSICAL
DATA |
| Physical Appearance: |
Liquid |
| Density: |
0.85 + 0.03 |
| Flash point: |
More than 50 °C |
| Application: |
Domestic Use |
| Packaging Type: |
Barrel |
| Form: |
Powder, Liquid |
| Pack Size: |
200 Kg |
|
| AVAILABILITY |
200 Liters Net in New Steel Barrels. |
©
Imperial Oilfield Chemicals Private Limited, Baroda. All Rights Reserved (Terms
of Use)
